Axial Yeti Jr. Can-Am Maverick X3 1/18 RTR 4WD Electric Rock Racer Buggy w/2.4GHz Radio, Battery & Charger

Axial Yeti Jr. Can-Am Maverick X3 1/18 RTR 4WD Electric Rock Racer Buggy w/2.4GHz Radio, Battery & Charger

Axial Yeti Jr. Can-Am Maverick X3 1/18 RTR 4WD Electric Rock Racer Buggyw/2.4GHz Radio, Battery & Charger

The Yeti Jr RTR takes everything you admire about the 1/10 scale Yeti chassis and shrinks it down to 1/18 scale – then tops it off with a licensed Can-Am Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures!

Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque. When that muscle meets the tread of the Maxxis® Bighorn 2.0 radial tires, you’ve got all the traction you need for fast, smooth rides over virtually any surface.

WARNING: This product is only compatible with NiMH batteries. Do not use a LiPo battery or fire causing serious injury or damage to property may occur.

Features:

Licensed Can-Am Maverick X3 body and wheels
Licensed Maxxis Bighorn 2.0 tires
Spektrum STX2 2.4GHz transmitter
Spektrum waterproof ESC/Receiver Combo
Dynamite 37T brushed electric motor
High-torque metal gear servo for rough offroad conditions
AR18 solid rear axle with ample ground clearance
Adjustable coilover shocks
Three-linked rear suspension for improved handling
Independent front suspension for high speed stability
Rear hinge body mount system
48P gears give you more possible configurations
Adujstable motor mount and easy access chassis
Full vehicle ball bearings
Adjustable battery tray
Centered rear driveshaft for efficiency
Easy to Use USB Charger Included
Specifications:
Type: Rock Racer
Scale: 1/18
Length: 11″ (279.4mm)
Width: 7″ (177.8mm)
Height: 6.5″ (165.1mm)
Ground Clearance: 1.1″ (27mm)
Wheelbase: 8.1″ (205mm)
Weight: 1.6lbs (0.7kg)
Chassis: Molded tub style w/ rear trailing arms
Suspension: Front-Independent, Rear-3-Link w/integrated sway bar like support, AR18 2-pc solid rear axle w/captured pinion gear
Drivetrain: 4WD shaft drive
Tire Type: Non-directional tread pattern for use on a variety of terrain, S30 firmness compound
Motor or Engine: 380 Brush Equipped, 37 Turn
Speed Control: ESC/Receiver combo, Water Resistant
Radio: Spektrum FHSS 2.4GHz STX2 2-channel
Servos: Spektrum SX107 high torque micro w/metal gears
Batteries: Dynamite 7.2V 1300mAh NiMH with mini EC3 connector, flat configuration, 2/3A cell size
Charger: USB NiMH with red and green status indicators
Gear Pitch: 48-Pitch
Wheel Size: 1.2″ (30.5mm) Diameter, 12mm Hex
Kit/RTR: RTR
Shock Type: Coil over, oil-filled, 3mm shafts
Body: Can-Am Maverick X3 UTV, trimmed and painted, rear hinge body mount system
Ball Bearings: Full set, sealed cartridge type
Is Assembly Required: No

Includes:

(1) Yeti Jr Can-Am® Maverick X3 RTR Car
(1) Spektrum 2.4 GHz STX2 Transmitter
(1) 7.2V 6 Cell 1300 mAh NiMH Battery Pack
(1) USB NiMH Charger
(4) AA Alkaline Batteries
(1) Product Manual
Spare Parts and Tools
WARNING: This product is only compatible with NiMH batteries. Do not use a LiPo battery or fire causing serious injury or damage to property may occur.

Leave a Reply